Customer support

Back

VoIP installation

I use the FRITZ!Box

Please remember: your modem/router must always be switched on to enable your telephone to work.

1. Connect the power supply unit to the socket on the FRITZ!Box labeled “Power”. The “Power/DSL” LED begins flashing after a few seconds.

2. Connect the small part of the cable to the telephone socket and the bigger part of the cable to the socket on the FRITZ!Box labelled DSL/TEL. Please make sure that all filters are disconnected from the telephone socket first. The DSL cable has to be plugged in directly to the telephone socket.

3. Analogue telephones must be connected to the sockets labeled “FON 1” and “FON 2” on the FRITZ!Box. If you have an ISDN telephone, connect it to “FON S0”.

4. Connect your computer to the FRITZ!Box, with a LAN cable to the LAN Port or connect your computer wirelessly via WLAN.

* You can find more information on the guide provided with the FRITZ!Box.

I use the GigaSet IP telephone

Please remember: your modem/router must always be switched on to enable your telephone to work.

1. Prepare the handset: insert the batteries.

2. Connect the charging cradle of the handset to the main power supply to charge the batteries.

3. Connect the phone cable and power cable to the base of the telephone.

4. Connect the telephone base to the telephone network and the main power supply.

5. Connect the telephone base to the router for accessing the Internet.

6. Connect a computer to the router (optional).

* You can find more information on the guide provided with the Gigaset IP telephone.

I use the Cisco adapter

Please remember: your modem/router must always be switched on to enable your telephone to work.

1. Connect one end of the provided Ethernet cable to the Internet (blue) port. Connect the other end directly to your broadband modem/router.

2. Connect one end of a phone cable to the “Phone 2” (gray) port. Connect the other end to your analogue phone.

3. Connect the provided power adapter to the “Power” port.

* You can find more information on the guide provided with the Cisco adapter.

Still can’t find your question or want to leave a comment? Fill the form below or use live chat








Close